SCC Auto Tech Program Guide

<= /span>

AUTOMOTIVE TECHNOLOGY

Associate of Applied Science Degree=

Program Description

Department of Transportation Technologies

Scott Commun= ity College

Click on the photo above to take a V= irtual Tour of our facility &nbs= p; &= nbsp; Bettendorf, IA 52722

(563) 441-4202

Darrell Hanan

Departme= nt Coordinator

(563) 44= 1-4228

&nb= sp;

Contents

Program Description

Program Accreditation

Profession, Duties and Standards
Employment

Faculty

How to Enroll

Costs and Tools

Courses and Descriptions

Program Description

Since the inception of Scott= Community College, Auto Technology= has been one of the college’s most successful programs. The Automotive Technology Program is a two-year program admitting students in the Fall and Spring semester every year.=

The automotive ind= ustry is the single largest employer in the United States. = Our program is recognized by employers in Iowa and Illinois for its quality, and it is ASE certified. That means it has received a guarantee from the National Institute for Automotive Service Excellence t= hat it meets the highest industry standards.

In just two years, you'll ha= ve your Associate of Applied Science Degree, plus the skills you need to sol= ve the challenge of today's high-tech systems.

Back to Contents <= /span>

Program Accreditation =

In 1988 the Automotive Technology Program became the first program in Iowa to gain certification in Automotive Service Excellence (ASE). In 1991, 1995 the Automotive Technology Program received the award for Best in Iowa from the American Vocational Asso= ciation. Graduates from our program are prepared to pass certification exams in all = of the following eight areas:

Engine Repair

Manual Drive Train & Axles

Brakes=

Heating & Air Conditioning

Automotive Transmission/Transaxle

Suspension & Steering

Electrical/Electronics Systems

Engine Performance

Back to Contents

Full-Time vs. Part-Time Students

The Automotive Technology Program is designed for full-t= ime students interested in a career in diagnosing and repairing automobiles. St= udents interested in enrolling in specific disciplines or courses on a part-time b= asis may be admitted by the department coordinator. Classes in Automotive Techno= logy are taught by lecture and followed by appropriate laboratory experience.

Description of the Profession<= /o:p>

An Automotive Technician of today must be a versatile pe= rson willing to deal with customers as well as repair automobiles. Today’s technicians work with computers and other sophisticated diagnostic equipmen= t

Some of the graduates of this program will work in shops= as general line technicians performing work on all systems of the vehicle. Oth= ers Will work in specialty shops that specia= lize in just certain areas of the vehicle such as brakes or transmissions.<= /o:p>

Graduates may also work in related areas such as service advising or parts distribution.

Typical Duties

•     Diagnose & re= pair driveability problems

•     Troubleshoot and = repair electrical problems

•     Prepare repair estimates

•     Perform basic automobile service

•     Perform computeri= zed four wheel alignments

•     Diagnose & re= pair transmission and drive trains

•     Service & rep= air heating and air conditioning systems

•     Perform brake ser= vice

•     Advise customers

•     Attend classes &a= mp; seminars to stay current in the Field

•     Maintain equipmen= t used in shops

Back to Contents

Performance Standards

The Automotive Technician must have sufficient strength, motor coordination and manual dexterity to:

•        &= nbsp; Lift and move the various components of an automobile.

•        &= nbsp; Move toolboxes, floor jacks arid other portable devices freely about the shop ar= ea.

The Automotive Technician must be capable of:

•        &= nbsp; Reading arid interpreting various shop manuals and technical bulletins associated with   the automobile.

•        &= nbsp; Reading and inter= preting as well as writing repair orders.

•        &= nbsp; Communicating verbally with customers, parts personnel and management.<= /p>
•        &= nbsp; Interpreting electrical wiring schematics and diagrams.

The Automobile Technician must have the mental and intellectual capacity to:

•         &= nbsp; Logically solve mechanical problems.

•        &= nbsp; Absorb and understand the new technology as it evolves.

•        &= nbsp; Interpret electronic meters including oscilloscopes.
Back to Contents

Employment Opportunities=

Graduates are employed by automobile dealerships, indepe= ndent garages, fleet garages and chain stores, as well as city, county, state and federal agencies. Entry-level technicians can expect to earn between $16,000 and $25,000 annually. Experienced technicians earn considerably more.<= /o:p>

Job Outlook

The current job market for Automotive Technology remains very good. In the last five years there were more job opportunities than th= ere were graduates to fill them. On a national employment level this field rema= ins very good and stable. In 2004 automotive technicians held about 803,000 job= s. The number of jobs is expected to increase 10 to 15 percent through the year 2014.

Back to Contents

Program Faculty

The Automotive Technology Program along with the Diesel Technology Program at Sco= tt Community College e= mploys five instructors.

Alan Shaw, B.A., Master ASE Automotive Technician Certified

Darrell Hanan, A.A.S., B.T., Master ASE Automotive Technician & Advanced Level Engine Performance Certified

John Wingert, A.A.S., Master A= SE Automotive and Heavy-Duty Truck Technician Certified

How to Enroll

A candidate for admission to the Auto Technology Program must:

•Submit the Scott Community College admission application in person or by mail.

•Send all High School and College transcripts or G= ED scores to:

Student Services, Scott Community College,

̷= 0;………………500 Belmont Road,

̷= 0;………………Bettendorf, IA ….52722

• Complete the college assessment by making an appointment<= /span> with the Testing Center, 441-4088.     &nbs= p;            &= nbsp;           &nbs= p;               &= nbsp;           &nbs= p;            &= nbsp;           &nbs= p;            &= nbsp;

Back to Contents

= ;

Click HERE for the online appli= cation to EICC and Scott Community College

=

Back to Contents



Estimated Program Costs<= /b>

Approximate costs for the entire program are:=

In-State Tuition & Fees:            = ;            &n= bsp; $6630.00 (102.00 per credit hour)

Out-of-State Tuition & Fees:            =            $9945.00 (153.00 = per credit hour)

Books and Supplies: = ;            &n= bsp;            = ;    $800.00

Tools:   =             &nb= sp;           $2,5= 00.00**

*Tuition does not include the cost of developmental course-work (if necessary.)=

**Tools from the following list will cost from $1,500 to $2,500 depending on the ve= ndor you choose. Toolboxes also vary in price from $700 to $1,400.

           &= nbsp;           &nbs= p;            &= nbsp;           &nbs= p;            &= nbsp;           &nbs= p;            &= nbsp;           &nbs= p;            &= nbsp;           &nbs= p;            &= nbsp;           &nbs= p;       Back to Contents

Tools

Students are responsible for having their own tools. The minimum tools needed for completion of this program are listed below. =

AUTO MECHANICS TO= OL LIST

1/4= " drive socket set

-- Line wrenches 8mm to 17mm=

Box, ratchet, 3" extension, 6" exten= sion

1 Fender cover

Breaker handle

-- 12 volt electric test light

Sockets 4-15mm - 6 point sockets

-- electrical wire pliers

3/8= " drive socket set

-- heavy duty diagonal side cutter 6" len= gth

Box, ratchet, 1" extension, 2-4", 6-10" extension

-- Tire inflater

breaker handle bar

-- inspection mirror

Metric universal flex socket set, 10mm-19mm

-- Safety glasses

Metric - 10-23 MM 3/8 drive sockets=

-- Leather shoes

Deep Well Sockets 3/8 drive Metric -1= 0-19mm

5/16" 8 pt. Socket 3/8" Drive

-- 1 tool box (minimum 3 drawer rolling type cabinet)

3/8 drive torx bit set 27, 30, 40, 45, 50, 55<= o:p>

-- true-arc internal & external (conventio= nal)

1 Torque Wrench 3/8" drive, 30 to 200 inch pounds

Com= bination Wrench Set

Scratch awl (ice pick)

5/16, 11/32, 1/4, 3/8, 7/16, 1/2, 9/16, 5/8,

Air Nozzle with rubber tip <= /p>

Metric - combination 7-19 MM=

-- 1 pocket ruler 6" both metric & in= ches

1/2= " drive socket set

1 Hand held digital multimeter w/following:

Box, ratchet, extension 3", 6" 10&qu= ot; (approx.)

Minimum Required Features:

breaker bar handle, 1 universal flex extionsion,

D.C. volts 0.5% accuracy or better<= /span>

Standard sockets 13mm-24mm

A.C. volts

Deep well sockets 13mm-24mm<= /p>

D.C. current&= nbsp; 0-10 amps or 0-20A

Adapters 1/2 to 3/8, 3/8 and 1/2 drive; 3/8 to= 1/4

Resistance     Diode Check

-- 2 ball peen hammers 1-16 oz., 1-24 oz.=

Frequency    0-50Khz

-- 1 Pocket screw driver

Duty Cycle

-- pocket telescoping magnet=

Optional Features:

-- screwdriver set 3 phil= lips, 4 standard

Temperature

-- 1 punch set-5 piece-1/8, 5/16, 3/8, 7/16, 1= /2

RPM

-- spark plug gauge set (wire type) .035 to .0= 80

Dwell

-- feeler gauge-flat type ignition and valve 4= 5&= deg;

Max-min-average

-- 1 battery post cleaner

Data Hold

-- 1 thermometer pocket type=

Analog Bar Graph

-- magnetic tool with handle=

Pulse Width (MS)

Dial Indicator - measure in .001" increme= nts clamp-on-base

-- leather gloves for welding, goggles #5 lens & tip

-- 1 pr. slip point pliers approx. 6" len= gth

Angled Pick

-- 1 cold chisel set - 5 piece-5/16, 7/16, 1/2, 5/8,       &nbs= p;            &= nbsp;   11/16

-- micrometer torque wrench, 1/2" drive w= ith ratchet…..(10 to 150 ft. lb. ran= ge)

-- snap ring pliers

Files: 12" round, 12"flat=

-- 1 pr. vice grip pliers 7" length (appr= ox.)

-- 1 pr. needle nose pliers, with cutter to 6" length

-- 1 pr. interlocking pliers 8" to 9" length

--1-6"electronic digital readout caliper<= span style=3D'mso-spacerun:yes'> metric/inch conversion

= -- 14 piece metric hex wrench set 2mm to 19 mm

-- wire brush

-- torx screwdriver set T15-T30

-- 1 gasket scraper (putty knife)

REV 6/08

tire pressure gauge 15-60 lbs.

Back to Contents

Uniforms<= /span>

Uniforms are not required but each student must have saf= ety glasses and leather work shoes. Sneakers and shorts are not allowed in laboratory areas.

Financial Aid/Scholarships

Many types of Financial Aid are available for Auto Technology students. If you need financial assistance please make an appointment with the Financial Aid Office. Financial aid forms for fall semester are due to the financial aid office April 1^st.

Student Organizations

Stu= dents are eligible for membership in the Auto Tech Club. The club has several worthwhile activities each year including field trips, fundraisers, and the annual car show. The highlight of the year is the SkillsUSA competition. Lo= cal winners compete in the state competition with the state winners moving on to compete in the national competition. In 1994, our club placed first and thi= rd in the state competition and 10th in the national competition. In 1998, our club placed third in the state competition. In 1999, our club placed second= in the state competition.

Articulation

The Scott Community College Auto Tech program does not h= ave articulation agreements with any local high schools at this time.

= ;

Back to Contents

<= /p>
Program/Course Descriptions

Automotive Technology

Scott Community College (Diplom= a, AAS)

First Semester <= /p>
         = ;

AUT606

AUT614

AUT115

AUT164

&= nbsp;

Math Elective; Applied Math Topics suggested

Basic Automotive Electricity/Electronics

Automotive Electrical I

Automotive Shop Safety

Automotive Engine Repair

English Elective; Communicatio= n Skills suggested

Total Hours

Hours=

3

3

3

1

4

3

17

Second Semester=

AUT524

AUT304

AUT802

AUT232

Automotive Brake Systems and Service

Automotive Manual Drive Tra= in and Axles

Engine Performance I=

Automotive Transmission I

Total Hours

4

4

3

3

14

Summer Session<= /p>
AUT404

AUT704

&= nbsp;



Automotive Suspension and Steering

Automotive Heating and Air Conditioning

Total Hours

Auto Technician Diploma Awarded

4

4

8

Third Semester<= o:p>

AUT811

AUT233

        = ;



H= umanities Elective; Working in America suggested

Engine Performance II

Automotive Transmission II<= /span>

Elective Business C= omputer Apps suggested

Total Hours



3

4

3

3

13

Fourth Semester=

AUT817

AUT656

AUT911

WEL331

Automotive Engine Performance III

Automotive Electrical II

Co-Op Experience

Welding Fundamentals

Total Hours

3

4

4

2

13

Associate in Applied Science degree (65 credits)

        &= nbsp;           &nbs= p;



Back to Contents

Bac= k to Program Course Sequence

Auto Technology Courses

MAT104 Applied Math Topics   3 cr. <= /p>

Presents algebra and geometry applied to specific trade applications. Mathematical ideas and procedures will be presented first, followed by applications wi= thin the various trades.

(59.4= Lec. Hrs.)<= /o:p>

Prere= quisite: Placement by college assessment test.

AUT606= Basic Automotive Electricity/Electronics        3 cr.=

In this course, the student is introduced to basic electrical and electronics principles. The basics are applied to automotive electrical circuits. What electricity is and how it does its work is covered in detail.= Lab sessions are spent turning theory into hands-on practice with meters and ba= sic circuits.

(39.6 Lec. Hrs./59.4 Lab Hrs.)

AUT614= Automotive Electrical I…..<= span style=3D'font-size:10.0pt;font-family:Arial;mso-bidi-font-family:"Times New= Roman"'>3 cr.

In this course the student is introduced to basic automo= tive battery, charging and starting systems. The operating principles will be discussed during the lecture/discussion sessions. Lab sessions are spent practicing testing, diagnosis and repair.

(39.6 Lec. Hrs./59.4 Lab Hrs.)

Prerequisite or Co-requisite: AUT116 and AUT606

AUT115 Automotive Shop Safety …..1 cr.

This course is designed to acquaint the student with the proper personnel and shop safety procedures needed to function in an automo= tive shop. Tool identification, tool care and maintenance will be covered. Polic= y, procedures and orientation will also be included in this course.=

(19.8 Lec. Hrs.)

Back to Program Course Sequence<= /span>

=

AUT164 Automotive Engine Repair…..4cr.

Basic theory of two-cycle and four-cycle gasoline engines and their application will be introduced. Disassembly, inspection and reassembly competencies will be experienced as well as cooling, lubrication, induction, exhaust, compression and valve systems. Students will develop competencies in precision measuring and services procedures.

(39.6 Lec. Hrs./118.8Lab Hrs.)

Co-requisite: AUT116

Bac= k to Program Course Sequence

AUT524 Automotive Brake Systems and Service…..4 cr.<= /span>

This course deals specifically with disc and drum brakes, power and conventional braking systems and emergency braking systems. Stude= nts will develop competencies aimed at entry-level skills as a brake specialist= .

(49.5 Lec. Hrs./89.1Lab Hrs.)=

Prerequisite or Co-requisite: AUT116

AUT30= 4 Automotive Manual Drive Train and Axles…..4 c= r.

Provides basic knowledge in automotive clutches, standard transmissions, transaxles and differentials.<= /span> Basic theory, diagnosis and service procedures are covered. Students will be able to correctly disassemble and reassemble standard transmissions, transa= xles and differentials in accordance with manufacturers’ guidelines.<= /o:p>

(49.5 Lec. Hrs./89.1Lab Hrs.)=

Prerequisite or Co-requisite: AUT116

AUT802 Engine Performance I …..3 cr.

T= his course is designed to train the student in engine mechanical testing and = ignition system theory and testing. Basic ignition system theory, operation and diagnosis will be covered. Electronic (EI) and distributor (DI) ignition systems will be discussed. Lab time will be used to learn the use of diagnostic equipment in troubleshooting and repair of engine mechanical a= nd ignition systems as they relate to driveability issues.=

(39.6 Lec. Hrs./ 59.4Lab Hrs.)

Prerequisite or Co-requisite: AUT606 and AUT116

Bac= k to Program Course Sequence

AUT232 Automotive Transmission I…..3 cr.

Thi= s course is designed to provide basic knowledge in the diagnosis and repair of the automatic transmission. The student will develop skills necessary to perform in-car automatic transmission service. The student will also develop an understanding of the operation and service of torque converters, planetary = gear trains and hydraulic components used in automatic transmissions. In-car service, as well as, removal-installation and overhaul procedures will be stressed in the lab portion of this course.

(39.6 Lec. Hrs./ 59.4Lab Hrs.)

Prerequisite or Co-requisite: AUT116

AUT404 Automotive Suspension and Steering…….4 cr.

This course deals specifically with automobile suspension and steering systems. Specific skills needed for the development of competencies will be taught. Competencies that are developed in this course= are aimed at entry-level skills as a suspension and steering specialist.

(49.5 Lec. Hrs./89.1Lab Hrs.)=

Prerequisite or Co-requisite: none=

AUT704 Automotive Heating and Air Conditioning……4 cr.

Provides basic knowledge in automotive heating and air conditioning. Basic the= ory, system diagnosis and service procedures are covered. Students are able to troubleshoot, purge, evacuate, charge and performance test an automobile or truck air conditioning system after completing this course.

(59.4 Lec. Hrs./59.4Lab Hrs.)=

Prerequisite or Co-requisite: none=

Bac= k to Program Course Sequence

AUT656= Automotive Electrical II……4 cr.

This course deals specifically with the automobile chass= is electrical systems. The student will be taught how automobile circuits are wired and how they operate. Troubleshooting and repair of the systems will = be stressed. Upon completion, the student should be able to demonstrate an understanding of the operation and design of the following types of chassis electrical systems: lighting systems, horn, wiper/washer, cooling fan, instruments and warning devices, speed control, anti-lock brake and traction control, HVAC, heated windows and mirrors, power accessories, and passive restraint systems.

(59.4 Lec. Hrs./59.4 Lab Hrs.)

Prerequisites or Co-requisites: AUT606 and AUT116

AUT811= Engine Performance II̷= 0;…4 cr.

Thi= s course is designed to give students an understanding of electronic fuel injection = and the use of computer controls in today's automobiles. The course will present Electronic Fuel Injection theory and component operation as well as automot= ive computer operation, sensor inputs and actuator outputs. Diagnosis and testi= ng of these systems will be discussed and practiced. Similarities and differen= ces of various Original Equipment Manufacturer systems will be discussed.<= /o:p>

(59.4 Lec. Hrs./59.4 Lab Hrs.)

Prerequisites: AUT606 and AUT802=

Bac= k to Program Course Sequence

AUT233 Automotive Transmission II        3 cr.

Thi= s course is designed to provide advanced knowledge and skills in the diagnosis and repair of automatic transmissions and transaxles. The student will develop skills in reading transmission hydraulic control circuit schematics. The student will perform diagnosis of electronically controlled automatic transmissions and transaxles. The student will dis-assemble and re-assemble an automatic overdrive transaxle. The use of pressure gauge= s, scan tools and other test equipment will be practiced.
(39.6 Lec. Hrs./ 59.4Lab Hrs.)

Prerequisites or Co-requisites: AUT116 and AUT232=

AUT817 Automotive Engine Performance III<= /span>……3 cr.

The= course will present automotive emissions, emission control devices and 5-gas analysis. = This course is designed to help the student improve his/her ability to diagnose driveability problems. Diagnosis and testing will be discussed and practice= d. A review of fuel, ignition and computer system testing will also be included.=

(34.7 Lec. Hrs./74.3 Lab Hrs.)

Prerequisites or Co-requisites: AUT606, AUT802 and AUT81= 1

COM102= Communication Skills….3 cr.

The purp= ose of this course is to prepare the student to communicate effectively in busin= ess and professional situations. The major emphasis is on improving interpers= onal skills, on using standard English in writing and speaking, on gaining proficiency in listening, and on composing specific types of business communications.

(59.4= Lec. Hrs.)<= /o:p>

Prerequisite: Appropriate placement based on assessment.

Bac= k to Program Course Sequence

AUT911 COOPERATIVE WORK EXPERIENCE    4 cr.

Cooperative Education Experience will integrate classroom theory with on-the-job training. The College will assist the student in securing employment which will be related to the student’s major fiel= d of study and/or career interests. Under the supervision of the College and the employer, the student participates in job training experiences. In addition= to employment, attendance at scheduled on-campus seminars is required. Seminars may include job searching skills as well as professional development. Stude= nt eligibility consists of the successful completion of 12 credit hours with E= ICCD with at least two courses in the chosen major and maintenance of a grade po= int average of 2.25 or higher.

(Variable Coop Hrs.)

Prerequisite: Consent of instructor.

Bac= k to Program Course Sequence

BCA188 Bus= iness Computer Apps…3 cr.

This course will cover microcomputer operating systems, hardware and application software. Word processing, Internet search, file management, software installation and auto tech information systems will be specific areas of coverage. Lab exercises will follow lecture and class discussion.

(39.6 Lec. Hrs./59.4 Lab Hrs.)

WEL331 Welding Fundamentals&= #8230;.2 cr.

This course is designed especially for Auto Technology a= nd Diesel Technology students. The weld processes that will be studied are tho= se that are currently being used in auto and truck repair centers. Competencies that will be developed are intended to provide entry-level skills. This cou= rse is not designed to provide the skills required for weld certification.

(19.8 Lec. Hrs./59.4 Lab Hrs.)

HUM105 Working in America=    3 cr.

A humanities course which has as its theme the interplay of work and the individual. It focuses on technological society and how the humanities can interpret and reflect upon that society.

(59.4 Lec. Hrs.)

=

Bac= k to Program Course Sequence

1/4= " drive socket set	-- Line wrenches 8mm to 17mm=
Box, ratchet, 3" extension, 6" exten= sion	1 Fender cover
Breaker handle	-- 12 volt electric test light
Sockets 4-15mm - 6 point sockets	-- electrical wire pliers
3/8= " drive socket set	-- heavy duty diagonal side cutter 6" len= gth
Box, ratchet, 1" extension, 2-4", 6-10" extension	-- Tire inflater
breaker handle bar	-- inspection mirror
Metric universal flex socket set, 10mm-19mm	-- Safety glasses
Metric - 10-23 MM 3/8 drive sockets=	-- Leather shoes
Deep Well Sockets 3/8 drive Metric -1= 0-19mm 5/16" 8 pt. Socket 3/8" Drive	-- 1 tool box (minimum 3 drawer rolling type cabinet)
3/8 drive torx bit set 27, 30, 40, 45, 50, 55<= o:p>	-- true-arc internal & external (conventio= nal)
1 Torque Wrench 3/8" drive, 30 to 200 inch pounds	Com= bination Wrench Set
Scratch awl (ice pick)	5/16, 11/32, 1/4, 3/8, 7/16, 1/2, 9/16, 5/8,
Air Nozzle with rubber tip <= /p>	Metric - combination 7-19 MM=
	-- 1 pocket ruler 6" both metric & in= ches
1/2= " drive socket set	1 Hand held digital multimeter w/following:
Box, ratchet, extension 3", 6" 10&qu= ot; (approx.)	Minimum Required Features:
breaker bar handle, 1 universal flex extionsion,	D.C. volts 0.5% accuracy or better<= /span>
Standard sockets 13mm-24mm	A.C. volts
Deep well sockets 13mm-24mm<= /p>	D.C. current&= nbsp; 0-10 amps or 0-20A
Adapters 1/2 to 3/8, 3/8 and 1/2 drive; 3/8 to= 1/4	Resistance Diode Check
-- 2 ball peen hammers 1-16 oz., 1-24 oz.=	Frequency 0-50Khz
-- 1 Pocket screw driver	Duty Cycle
-- pocket telescoping magnet=	Optional Features:
-- screwdriver set 3 phil= lips, 4 standard	Temperature
-- 1 punch set-5 piece-1/8, 5/16, 3/8, 7/16, 1= /2	RPM
-- spark plug gauge set (wire type) .035 to .0= 80	Dwell
-- feeler gauge-flat type ignition and valve 4= 5&= deg;	Max-min-average
-- 1 battery post cleaner	Data Hold
-- 1 thermometer pocket type=	Analog Bar Graph
-- magnetic tool with handle=	Pulse Width (MS)
Dial Indicator - measure in .001" increme= nts clamp-on-base	-- leather gloves for welding, goggles #5 lens & tip
-- 1 pr. slip point pliers approx. 6" len= gth	Angled Pick
-- 1 cold chisel set - 5 piece-5/16, 7/16, 1/2, 5/8, &nbs= p; &= nbsp; 11/16	-- micrometer torque wrench, 1/2" drive w= ith ratchet…..(10 to 150 ft. lb. ran= ge)
-- snap ring pliers	Files: 12" round, 12"flat=
-- 1 pr. vice grip pliers 7" length (appr= ox.)	-- 1 pr. needle nose pliers, with cutter to 6" length
-- 1 pr. interlocking pliers 8" to 9" length	--1-6"electronic digital readout caliper<= span style=3D'mso-spacerun:yes'> metric/inch conversion
= -- 14 piece metric hex wrench set 2mm to 19 mm	-- wire brush
-- torx screwdriver set T15-T30	-- 1 gasket scraper (putty knife)
REV 6/08	tire pressure gauge 15-60 lbs.